Cisco ASR 9000 Series - Page 38

◦
configure
◦
multicast-routing vrf vrf_name
◦
address-family ipv4
◦
mdt default mldp ipv4 root-node
For profile 1 (MLDP Rosen), the mdt default mldp ipv4 command and for profile 4/5 (MS- PMSI with
BGP-AD), the mdt partitioned mldp ipv4 mp2mp/p2mp command are configured.
•
Configuring the Route Distinguisher
◦
configure
◦
router bgp AS Number
◦
vrf vrf_name
◦
rd rd_value
•
Configuring Data MDTs (optional)
◦
configure
◦
multicast-routing vrf vrf_name
◦
address-family ipv4
◦
mdt data <1-255>
•
Configuring BGP MDT address family
◦
configure
◦
router bgp AS Number
◦
address-family ipv4 mdt
•
Configuring BGP vpnv4 address family
◦
configure
◦
router bgp AS Number
◦
address-family vpnv4 unicast
•
Configuring BGP IPv4 VRF address family
◦
configure
◦
router bgp AS Number
◦
vrf vrf_name
◦
address-family ipv4 unicast
•
Configuring PIM SM/SSM Mode for the VRFs
◦
configure
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
38
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software
Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support