Cisco ASR 9006 Installation Guide

Air baffles allow for front-to-back air flow through the chassis and help isolate exhaust air from the intake
air.
If you ordered the optional air baffle accessory kit, follow these steps to install it:
Procedure
Step 1 Attach the support bracket (part number: 800-43857-01) to the left side of the Cisco ASR 9006 Router using
six 12-24 x 0.5 in. pan-head screws (part number: 48-0523-01). See the figure below.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
138
Unpacking and Installing the Chassis
Installing Optional Air Baffles on the Cisco ASR 9006 Router

Cisco ASR 9006 Specifications

General

Chassis Type	Modular
Rack Units	10 RU
Slots	6
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
Power Supply	AC or DC
Cooling	Front-to-back airflow
Input Voltage	100-240 VAC or -48 to -60 VDC
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	10GE, 40GE, 100GE
Management Interfaces	Ethernet, Console, Auxiliary