Cisco ASR 9006 Installation Guide

If a fan tray is still not functioning, there could be a problem with the fan tray controller card or an
undetected problem in the fan tray cable. Replace the fan tray.
•
• If the new fan tray does not function, contact a Cisco customer service representative for assistance.
• If the Fault indicator is on, the power supply is faulty. Replace the power supply.
• If the Temp and Fault indicators are on, an overtemperature condition exists:
• Verify that the power supply fan is operating properly.
• If the fan is not operating, replace the power supply.
• Contact your Cisco representative if replacing the power supply does not fix the problem.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
220
Troubleshooting the Installation
Isolating Cooling Subsystem Problems

Cisco ASR 9006 Specifications

General

Chassis Type	Modular
Rack Units	10 RU
Slots	6
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
Power Supply	AC or DC
Cooling	Front-to-back airflow
Input Voltage	100-240 VAC or -48 to -60 VDC
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	10GE, 40GE, 100GE
Management Interfaces	Ethernet, Console, Auxiliary