EasyManuals Logo

Cisco ASR-920-12SZ-IM User Manual

Cisco ASR-920-12SZ-IM
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Figure 4: Cisco ASR-920-12SZ-IM RouterDimensions
External Interfaces
The external physical interfaces on the front panel of the router are:
Network Interfaces
Network Timing Interfaces
External Alarm Inputs
Management Interfaces
Mangement ENET Port
RS232 Console Port
USB Console
USB Mass Storage
Zero Touch Provisioning (ZTP)
RS232 Auxiliary Console Port
Power Supply
The router supports AC, DC, or a combination of both power supplies in a 1+1 redundant configuration. For information on installing
the power supplies, see the Installing the Power Supply section.
6

Other manuals for Cisco ASR-920-12SZ-IM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR-920-12SZ-IM and is the answer not in the manual?

Cisco ASR-920-12SZ-IM Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
Networking standardsIEEE 802.3x
Ethernet LAN data rates10, 100, 1000, 10000 Mbit/s
USB ports quantity2
Ethernet LAN (RJ-45) ports8
Product colorGray
Rack capacity1U
Antenna typeNot supported
AC input voltage100 - 240 V
Power source typeAC, DC, PoE
AC input frequency50 - 60 Hz
Power consumption (typical)130 W
Non-operating altitude0 - 4570 m
Operating temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)5 - 95 %
SafetyUL 60950-1, 2005, CAN/CSA C22.2 No. 60950-1: 2005, IEC 60950-1, 2005, EN 60950-1, 2005, AS/NZS 60950.1:2005
Electromagnetic compatibilityFCC CFR47 Part 15 Class A
Mean time between failures (MTBF)407230 h
Firewall-
Security algorithmsIPSec
Weight and Dimensions IconWeight and Dimensions
Depth286.54 mm
Width444.5 mm
Height44 mm
Weight4830 g

Related product manuals