Cisco ASR 920 series - Page 19

26 | FPGA CCM Q | 3000 | 6000
27 | FPGA CFE Q | 3000 | 6000
28 | L2PT DUP Q | 4000 | 8000
Router#show platform hardware pp active infrastructure pi npd rx policer
PUNT POLICER
Ring | Queue Name | Punt rate | Burst rate
-----+---------------------+---------------------+--------------------
0 | SW FORWARDING Q | 500 | 1000
1 | ROUTING PROTOCOL Q | 500 | 1000
2 | ICMP Q | 500 | 1000
3 | HOST Q | 1000 | 2000
4 | ACL LOGGING Q | 500 | 1000
5 | STP Q | 3000 | 6000
6 | L2 PROTOCOL Q | 1000 | 2000
7 | MCAST CONTROL Q | 1000 | 2000
8 | BROADCAST Q | 500 | 1000
9 | REP Q | 3000 | 6000
10 | CFM Q | 3000 | 6000
11 | CONTROL Q | 1000 | 2000
12 | IP MPLS TTL Q | 1000 | 2000
13 | DEFAULT MCAST Q | 500 | 1000
14 | MCAST ROUTE DATA Q | 500 | 1000
15 | MCAST MISMATCH Q | 500 | 1000
16 | RPF FAIL Q | 500 | 1000
17 | ROUTING THROTTLE Q | 500 | 1000
18 | MCAST Q | 500 | 1000
19 | MPLS OAM Q | 1000 | 2000
20 | IP MPLS MTU Q | 9000 | 10000
21 | PTP Q | 3000 | 6000
22 | LINUX ND Q | 500 | 1000
23 | KEEPALIVE Q | 1000 | 2000
24 | ESMC Q | 3000 | 6000
25 | FPGA BFD Q | 4000 | 8000
26 | FPGA CCM Q | 2000 | 4000
27 | FPGA CFE Q | 3000 | 6000
28 | L2PT DUP Q | 4000 | 8000
Use the show platform hardware pp active feature qos policer cpu all 1 command to clear the statistics
of all the CPU queues.
Use the show platform hardware pp active feature qos policer cpu all 0 command to clear the statistics
of a particular CPU queue.
########## Stats for CPU queue 0 ##########
Internal Qnum: 1 Queue Name: SW FORWARDING Q
Policer conform: 0 (packets) 0 (bytes)
Policer exceed: 0 (packets) 0 (bytes)
RM Drops: 0 (packets) 0 (bytes)
Policer commit rate is: 1000000, Policer burst commit is 100000
########### Stats for CPU queue 1 ##########
Internal Qnum: 2 Queue Name: ROUTING PROTOCOL Q
Policer conform: 0 (packets) 0 (bytes)
Policer exceed: 0 (packets) 0 (bytes)
RM Drops: 0 (packets) 0 (bytes)
Policer commit rate is: 1000000, Policer burst commit is 100000
———————
———————
———————
########### Stats for CPU queue 30 ##########
Internal Qnum: 31 Queue Name: ICMP UNREACHABLE Q
Policer conform: 0 (packets) 0 (bytes)
Policer exceed: 0 (packets) 0 (bytes)
RM Drops: 0 (packets) 0 (bytes)
Policer commit rate is: 1000000, Policer burst commit is 100000
########### Stats for CPU queue 31 ##########
Internal Qnum: 32 Queue Name: SSFPD Q
Policer conform: 0 (packets) 0 (bytes)
Policer exceed: 0 (packets) 0 (bytes)
QoS: Policing and Shaping Configuration Guide (Cisco ASR 920 Series)
13
Punt Policing and Monitoring
Verifying Punt Policing