Cisco ASR 920 series - Connecting Timing Cables; Connecting a Cable to the BITS Interface

encapsulation dot1q 100
bridge-domain 100
!
service instance 2 ethernet
encapsulation dot1q 101
bridge-domain 101
Additional References
Related Documents
Document TitleRelated Topic
Cisco IOS Master Commands List, All ReleasesCisco IOS commands
Cisco IOS QoS Command ReferenceQoS commands: complete command syntax,
command modes, command history, defaults, usage
guidelines, and examples
"Policing and Shaping Overview" modulePolicing and shaping
"Applying QoS Features Using the MQC" moduleClass maps
"Applying QoS Features Using the MQC" modulePolicy maps
QoS Congestion Management Configuration Guide
Low Latency Queueing
Standards and RFCs
TitleStandard
--No new or modified standards are supported, and
support for existing standards has not been modified.
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco IOS XE software releases, and feature sets, use
Cisco MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
No new or modified MIBs are supported, and support
for existing MIBs has not been modified.
QoS: Policing and Shaping Configuration Guide (Cisco ASR 920 Series)
27
Port-Shaper and LLQ in the Presence of EFPs
Additional References