Cisco ASR 920 series - Page 47

PurposeCommand or Action
• conform-action action— (Optional) Specifies action to
take on packets that conform to the specified rate limit.
• pir pir-bps—(Optional) Specifies the peak information
rate (PIR).
cir percent percent option is not supported on the
router.
Note
(Optional) Specifies the action to take on packets that conform
to the police rate limit and enters policy-map class police
configuration mode.
conform-action action
Example:
Device(config-pmap-c-police)# conform-action
transmit
Step 11
Exits policy-map class police configuration modeexit
Example:
Device(config-pmap-c-police)# exit
Step 12
Exits policy-map class configuration modeexit
Example:
Device(config-pmap-)# exit
Step 13
Enters control plane configuration mode.control-plane
Example:
Device(config)# control-plane
Step 14
Attaches a policy map to a control plane.
service-policyinput policy-map-name
Example:
Device(config-cp)# service-policy input
Policy1
Step 15
Exits control plane configuration mode and returns to global
configuration mode.
exit
Example:
Device(config-cp)# exit
Step 16
Exits global configuration mode returns to privileged EXEC
mode.
exit
Example:
Device(config)# exit
Step 17
QoS: Policing and Shaping Configuration Guide (Cisco ASR 920 Series)
41
Control Plane Policing
Configuring Control Plane Policing to Mitigate Denial-of-Service Attacks