Cisco ASR 920 series Configuration

Restrictions for MPLS TE over BDI
•
MPLS TE - Verbatim Path Support
•
Explicit Path Node exclusion
•
P2MP TE Tunnels
•
Auto-tunnel one-hops and backups
•
Auto bandwidth
•
Inter area or AS TE
•
Auto route destinations
•
FRR link ornode protection
Information About MPLS Traffic Engineering over BDI
Features of MPLS Traffic Engineering over BDI
The MPLS Traffic Engineering over BDI feature enables MPLS TE tunnels over BDI.
Supported Features
Your network must support the following:
•
MPLS TE tunnels
•
Policy Routing onto MPLS TE Tunnels
•
MPLS TE - Forwarding Adjacency
• MPLS TE – RSVP Hello State Timer
•
MPLS TE - LSP Attributes
•
MPLS TE - IP Explicit Address Exclusion
•
MPLS TE - Configurable Path Calculation Metric for Tunnels
•
MPLS TE - Verbatim Path Support
•
Pseudo-wire mapping onto TE tunnels.
How to Configure MPLS Traffic Engineering over BDI
This section assumes that you want to configure MPLS TE over BDI.
MPLS Traffic Engineering Path Calculation and Setup Configuration Guide, Cisco IOS XE Release 3S (Cisco
ASR 920 Series)
44
MPLS Traffic Engineering over Bridge Domain Interfaces
Restrictions for MPLS TE over BDI

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English