EasyManuals Logo
Home>Cisco>Network Router>ASR 920 series

Cisco ASR 920 series User Manual

Cisco ASR 920 series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
To disconnect the Linux USB console from the terminal window, enter Ctrl-a followed by : then quit
Installing the Cisco USB Device Driver
A USB device driver must be installed the first time a Microsoft Windows-based PC is connected to the USB
serial port on the router.
This procedure describes how to install the Microsoft Windows USB device driver in Microsoft Windows
XP, Windows Vista, Windows 2000, Windows 7, and Windows 8. Download the driver for your router model
from the Tools and Resources Download Software site, USB Console Software category, at:
https://software.cisco.com/download/release.html?mdfid=286037604&flowid=71056&softwareid=282855122&release=3.13&relind=AVAILABLE&rellifecycle=&reltype=latest
To download the driver, you must have a valid service contract associated to your Cisco.com profile.
Note
SUMMARY STEPS
1. Unzip the file asr-9xx_usbconsole_drivers.zip.
2. Double-click xrusbser_ver2100_installer.exe in the XR21x141x-Win-DriversOnly-Vers2.1.0.0/EXE
folder.
3. Click Next. The InstallShield Wizard Completed window is displayed.
4. Click Finish.
5. Connect the USB cable to the PC and router USB console ports. Follow the on-screen instructions to
complete the installation of the driver.
6. XR21V1401 USB UART Device driver successfully installed message is displayed.
DETAILED STEPS
Step 1 Unzip the file asr-9xx_usbconsole_drivers.zip.
Step 2 Double-click xrusbser_ver2100_installer.exe in the XR21x141x-Win-DriversOnly-Vers2.1.0.0/EXE folder.
Installation Wizard GUI is displayed.
Step 3 Click Next. The InstallShield Wizard Completed window is displayed.
Step 4 Click Finish.
Step 5 Connect the USB cable to the PC and router USB console ports. Follow the on-screen instructions to complete the
installation of the driver.
Step 6 XR21V1401 USB UART Device driver successfully installed message is displayed.
The USB console is ready for use.
Uninstalling the Cisco USB Driver
This procedure describes how to uninstall the Microsoft Windows USB device driver in Microsoft Windows
XP, Windows Vista, Windows 2000, Windows 7, and Windows 8.
Installing the Cisco ASR 920 Series Router
29
Installing the Cisco ASR 920 Series Router
Installing the Cisco USB Device Driver

Other manuals for Cisco ASR 920 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 920 series and is the answer not in the manual?

Cisco ASR 920 series Specifications

General IconGeneral
BrandCisco
ModelASR 920 series
CategoryNetwork Router
LanguageEnglish

Related product manuals