Click .
On the OVF Template Details page click .
On the and Location page enter as the Name for this TelePresence Content
Server VM guest.
On the Disk Format page, ensure that the default disk format of
is selected and then click .
Because VM performance may degrade during the resizing of a partition, Thin Provision is not
recommended.
On the Ready to Complete page, confirm your deployment settings, select
and click .
The TelePresence Content Server OVA is now deployed as a guest on the VM Host.
Install Windows Server 2008 Standard R2 SP1 (recording only)
Install Windows Server 2008 Standard R2 Service Pack 1 in the new VM created in the
previous procedure.
Create two partitions on the host while installing Windows:
C: for program files with a minimum of 100 GB space
E: for media files with the remainder of available space
Follow the prompts to complete the Windows Server installation.
Install VMware Tools.
To configure the IP information, enter the following in the relevant fields:
IP address –
Subnet mask –
Default gateway –
DNS server –
Complete all critical windows update, close all open applications and disable virus-scanning
software and other software that may prevent an installation from completing.
To Next Page
Loading...
