Need help?Do you have a question about the Cisco BE6000 and is the answer not in the manual?
General| Category | Conference System |
|---|---|
| Model | BE6000 |
| Manufacturer | Cisco |
| Audio Codecs | G.711, G.722, G.729 |
| Video Codecs | H.264 |
| Network Interfaces | Gigabit Ethernet |
| Power Supply | Internal AC power supply |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Storage Temperature | -4°F to 149°F (-20°C to 65°C) |
| Relative Humidity | 10 to 90% noncondensing |
Procedures for installing the TelePresence Server Virtual Machine.
Procedures for deploying and configuring TelePresence Conductor.
Steps to install TMS and TMSPE on Windows Server.
Steps to configure Site settings and recording aliases for TCS.
Creating and configuring conference bridge pools.
Creating a template for instant CMR conferences.
Creating a template for personal CMR conferences.
Creating a template for scheduled CMR conferences.
Enabling TMSPE within TMS for provisioning.
Adding TelePresence Conductor as a resource for CMR.
Configuring Collaboration Meeting Room templates in TMS.
Discovering and adding TelePresence Conductor for scheduling.
Discovering and adding TelePresence Server for scheduling.
Setting up conference parameters like numeric ID base and step.
Creating a video region with specified bandwidth.
Creating a device pool and assigning the video region.
Setting up a SIP trunk from Unified CM to TelePresence Conductor for CMR.
Setting up a SIP trunk from Unified CM to Conductor for instant CMR.
To Next Page