If connecting teamed NICs to a Cisco switch channel-group, ensure that the NIC teaming load
balancing policy is set to Route based on IP hash. For more information about this policy and other
aspects of hypervisor networking for Cisco Collaboration applications, see Deploying Expressway
with Business Edition at http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucm/BE6000/
InstallationGuide/10_01/Deploying_Expressway_with_Business_Edition.pdf
Note
Figure 10: Fault Tolerance for Business Edition Network Connectivity
The Hypervisor is now ready to host virtualized collaboration applications. Virtual machines for seven of the
most commonly used collaboration applications are predeployed on the hypervisor for you. Software for these
collaboration applications and additional applications are also preloaded in the datastore for your convenience.
Step 6
Browse the datastore:
a) Navigate to Configuration > Hardware > Storage.
b) Click Datastore to list the datastores in the Business Edition server.
Cisco Business Edition 7000 Installation Guide, Release 11.6
10
Installation
Access and Configure Hypervisor
To Next Page
Loading...
Need help?
General
