To Next PageTo Next Page
Need help?Do you have a question about the Cisco C1000-16T-E-2G-L and is the answer not in the manual?
General| Model | C1000-16T-E-2G-L |
|---|---|
| Device Type | Switch |
| Ports | 16 |
| Uplink Ports | 2 |
| Layer | Layer 2 |
| Power over Ethernet (PoE) | No |
| Switching Capacity | 32 Gbps |
| Forwarding Rate | 23.8 Mpps |
| Weight | 6.17 lbs |
| Power Supply | Internal |
| Forwarding bandwidth | 32 Gbps |
| Switching bandwidth | 32 Gbps |
| DRAM | 512 MB |
| Stackable | No |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| MAC Address | 8000 |
| Management | CLI |
Details the physical components on the front panel, including ports, LEDs, and buttons.
Explains the functionality of PoE, 10/100/1000 Ethernet ports, console ports, and SFP module slots.
Essential safety warnings and precautions to be followed before and during switch installation.
Instructions for physically mounting the switch on a desk, shelf, wall, rack, or DIN rail.
Details on connecting devices via PoE and standard Ethernet ports, including configuration.
Guide to using the initial setup wizard for basic IP configuration and network access.
