Cisco C1000-16T-E-2G-L - Front Panel Components

DescriptionSwitch Model
Externally powered; 8 10/100/1000 PoE+ ports (PoE budget of 67W); 2 1-Gigabit
SFP module uplink slots or 2 RJ-45 slots.
C1000-8P-E-2G-L
8 10/100/1000 PoE+ ports (PoE budget of 120W); 2 1-Gigabit SFP module uplink
slots or 2 RJ-45 slots.
C1000-8FP-2G-L
Externally powered; 8 10/100/1000 PoE+ ports (PoE budget of 120W); 2 1-Gigabit
SFP module uplink slots or 2 RJ-45 slots.
C1000-8FP-E-2G-L
16 10/100/1000 Ethernet ports; 2 1-Gigabit small form-factor pluggable (SFP)
module uplink slots.
C1000-16T-2G-L
Externally powered; 16 10/100/1000 Ethernet ports; 2 1-Gigabit SFP module uplink
slots.
C1000-16T-E-2G-L
16 10/100/1000 Power over Ethernet plus (PoE+) ports (PoE budget of 120W); 2
1-Gigabit small form-factor pluggable (SFP) module uplink slots.
C1000-16P-2G-L
Externally powered; 16 10/100/1000 PoE+ ports (PoE budget of 120W); 2 1-Gigabit
SFP module uplink slots.
C1000-16P-E-2G-L
16 10/100/1000 PoE+ ports (PoE budget of 240W); 2 1-Gigabit SFP module uplink
slots.
C1000-16FP-2G-L
Front Panel
This section describes the front panel components of an 8-port and 16-port Cisco Catalyst 1000 switch.
• 8 or 16 downlink Ethernet ports of one of these types:
• 10/100/1000
• 10/100/1000 PoE+
• 2 SFP module ports
• RJ-45 console port
• USB mini-Type B (console) port
• USB Type A port
• LEDs
• Reset button
Cisco Catalyst 1000 Series 8-Port and 16-Port Switch Hardware Installation Guide
2
Product Overview
Front Panel