Cisco Catalyst 250 Series Getting Started Guide

Revised: December 3, 2013, OL-28310-02
Getting Started with Your Switch
This guide provides instructions on how to use Express Setup to initially configure your Catalyst switch. It also covers switch
management options, basic rack-mounting, stacking guidelines, port and module connection procedures, and troubleshooting help.
Before installing or upgrading the switch, refer to the release notes.Note
Box Contents
Figure 1: Box Contents
Four number-10 Phillips pan-head screws (48-0627-01)9Catalyst 2960-X switch
1
or Catalyst 2960-XR switch (power supply modules not
shown)
1
Four number-8 Phillips flat-head screws (48-2927-01)
for Catalyst 2960-X switches
Eight number-8 Phillips flat-head screws (48-2927-01)
for Catalyst 2960-XR switches
10AC power cord2
Two number-4 pan-head screws (48-0482-01)
3
11Four rubber mounting feet3
One black Phillips machine screw (48-0654-01)12Documentation4
(Optional)
2
Console cable or USB cable13Two 19-inch mounting brackets5
2

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English