Cisco Catalyst 2960-L Smart Managed Series - Mounting a 24-Port or 48-Port Switch in a Rack

Mid-mounting position3Front-mounting position1
Rear-mounting position4Number-8 Phillips flat-head screws2
Mounting a 24-Port or 48-Port Switch in a Rack
Step 1 Use the four supplied Phillips machine screws to attach the brackets to the rack.
Step 2 Use the black Phillips machine screw to attach the cable guide to the left or right bracket.
Figure 11: Mounting the Switch in a Rack
Number-12 Phillips pan-head screws
(48-0523-01) or Number-10 Phillips pan-head
screws (48-0627-01)
4Cable guide1
Mid-mounting position5Phillips machine screw, black (48-0654-01)2
Cisco Catalyst 2960-L Smart Managed Series 24-Port and 48-Port Switch Hardware Installation Guide
21
Switch Installation
Mounting a 24-Port or 48-Port Switch in a Rack