Cisco Catalyst 2960-L Smart Managed Series - Page 38

Figure 16: Locking the Retainer
Latches3AC power cord1
Sleeve for thin power cords2
Step 5 (Optional) Use the small sleeve for thin power cords. Use the small sleeve to provide greater stability for thin cords.
Detach the sleeve, and slide it over the power cord.
Figure 17: Sleeve Around the Power Cord
AC power cord2Sleeve for thin power cords1
Step 6 Secure the AC power cord by pressing on the retainer.
Cisco Catalyst 2960-L Smart Managed Series 24-Port and 48-Port Switch Hardware Installation Guide
26
Switch Installation
Installing the Power Cord Retainer (Optional)