Cisco Catalyst 2960-L Getting Started Guide

This section lists the contents of the shipping box for a 24-port and 48-port Cisco Catalyst 2960-L switch.
Figure 2: Box Contents of a 24-Port and 48-Port Cisco Catalyst 2960-L Switch
Four Number-10 Phillips pan-head screws
(48-0627-01)
824-port and 48-port Cisco Catalyst 2960-L
switch
1
Four Number-8 Phillips flat-head screws
(48-2927-01)
9AC power cord2
One black Phillips machine screw
(48-0654-01)
10Four rubber-mounting feet (51-0089)3
(Optional) Console cable or USB cable11Compliance documentation
(78-100866-01)
4
(Optional) Power cord retainer12Two 19-inch mounting brackets5
Icon legend label (47-103380-01)13Cable guide6
Four Number-12 Phillips pan-head screws
(48-0523-01)
7
Cisco Catalyst 2960-L Switch Getting Started Guide
3
Getting Started with the Switch
Box Contents

Cisco Catalyst 2960-L Specifications

General

Subtype	Gigabit Ethernet
Power Device	Internal power supply
Stacking	Not supported
Model	Catalyst 2960-L
Uplink Interfaces	4 x Gigabit SFP
Power Supply	Internal
Device Type	Switch
Routing Protocol	Static IP routing
Features	VLAN support, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1w, IEEE 802.1s
Memory	256 MB Flash
Dimensions	1.73 in x 17.5 in x 9.4 in
Operating Temperature	32 to 113°F (0 to 45°C)