Cisco Catalyst 2960-L Getting Started Guide

Box Contents
This section lists the contents of the shipping box for an 8-port and 16-port Cisco Catalyst 2960-L switch.
Figure 1: Box Contents of an 8-Port and 16-Port Cisco Catalyst 2960-L Switch
(Optional) Console cable or USB cable78-port or 16-port Cisco Catalyst 2960-L
switch
1
(Optional) Power cord retainer8AC power cord2
(Optional) Magnet tray combo9Four rubber mounting feet (51-0089)3
(Optional) Cable guard10Compliance documentation
(78-100866-01)
4
(Optional) DIN rail mount11Three number-8 screws (48-1689-01)5
Icon legend label (47-103380-01)12Screw template (47-100996-02)6
Cisco Catalyst 2960-L Switch Getting Started Guide
2
Getting Started with the Switch
Box Contents

Cisco Catalyst 2960-L Specifications

General

Subtype	Gigabit Ethernet
Power Device	Internal power supply
Stacking	Not supported
Model	Catalyst 2960-L
Uplink Interfaces	4 x Gigabit SFP
Power Supply	Internal
Device Type	Switch
Routing Protocol	Static IP routing
Features	VLAN support, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1w, IEEE 802.1s
Memory	256 MB Flash
Dimensions	1.73 in x 17.5 in x 9.4 in
Operating Temperature	32 to 113°F (0 to 45°C)