Cisco Catalyst 3850 Deployment Guide

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 25 of 54
Evaluation RTU License
An evaluation license allows you to evaluate any license for 90 days free of charge. To activate an evaluation
license, accept the EULA. The evaluation license EULA assumes that you will purchase a permanent license within
90 days; if you do not purchase a permanent license, the evaluation license is deactivated after 90 days. You
receive a syslog message warning about deactivation 10 days before the evaluation license expires and another
message 5 days before expiration. After the 90-day period expires, syslog messages appear every day until you
reload the switch:
Note: You can activate a 90-day evaluation license only once on each Cisco Catalyst 3850 Switch. After the 90
days have expired, you cannot activate another 90-day evaluation license on the same switch.
Use these commands to enable an evaluation license:
After a reload:

Cisco Catalyst 3850 Specifications

General

Stacking Bandwidth	480 Gbps
Max Stacking Units	9
Form Factor	Rack-mountable
RAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3850
Ports	24 or 48 Gigabit Ethernet ports
Uplink Interfaces	4 x 1GE, 2 x 10GE, or 4 x 10GE
Power Supply	Redundant power supplies
Dimensions	44.5 x 44.8 x 4.45 cm
Weight	7.6 kg
Features	IPv6
Power over Ethernet (PoE)	PoE, PoE+, UPOE (varies by model)
Operating Temperature	0 to 40°C