AP Model Numbers and Regulatory Domains
DetailsProduct IDAP Type
Wi-Fi 6E AP, tri-band, 802.11ax with internal antennasCW9166I-A
CW9166I-B
CW9166I-E
CW9166I-F
CW9166I-Q
CW9166I-R
CW9166I-Z
CW9166I-ROW
CW9166I-MR
Access Point for indoor environments, with
internal antennas
Verify whether the AP model you have is approved for use in your country. To verify approval and to identify
the regulatory domain that corresponds to a particular country, see https://www.cisco.com/c/dam/assets/prod/
wireless/wireless-compliance-tool/index.html. Not all regulatory domains have been approved. As and when
they are approved, this compliance list is updated.
The x in the model numbers represents the regulatory domain.
Note
Antennas and Radios
The following sections provide detailed information about the AP's antennas and radios.
Internal Antennas
The Cisco Catalyst Wireless 9166I AP (CW9166I-x) has the following list of internal antennas:
• Four internal dual-band antennas with a dedicated 2.4-GHz radio and a 5-GHz radio
• Four internal dual-band antennas with a dedicated 6-GHz radio and a 5-GHz radio
• One internal single-band antenna with a dedicated 2.4-GHz IoT radio
• Two tri-band antennas with a dedicated 2.4 GHz, 5-GHz, and 6-GHz Aux radio
Cisco Catalyst Wireless 9166I Series Wi-Fi 6E Access Point Hardware Installation Guide
4
About the Access Point
AP Model Numbers and Regulatory Domains
To Next Page
Loading...
