CHAPTER 3
Unpacking Your Access Point
• Package Contents, on page 15
• Unpacking the Access Point, on page 15
• Cisco Orderable Accessories, on page 16
Package Contents
Each AP package contains the following items:
• One CW9166I AP
• Default mounting brackets: Adjustable ceiling-rail clips AIR-AP-T-RAIL-R and AIR-AP-BRACKET-1=
• Orderable optional mounting brackets: AIR-AP-T-RAIL-F, and AIR-AP-BRACKET-2=
• Cisco product documentation and pointer card
When Cisco CW9166I-MR AP is ordered, mounting bracket AIR-AP-BRACKET-2= is included by default.
Note
Unpacking the Access Point
Procedure
Step 1 Unpack and remove the access point and the selected mounting accessory kit from the shipping box.
Step 2 Return the packing material to the shipping container and save it for future use.
Step 3 Verify that you have received all the items you ordered. If any item is missing or is damaged, contact your
Cisco representative or reseller for instructions.
Cisco Catalyst Wireless 9166I Series Wi-Fi 6E Access Point Hardware Installation Guide
15
To Next Page
Loading...
