Cisco Catalyst 9200CX Compact Series User Manual

Figure 1: SD Card Slot
SD Card slot in locked position3SD Card slot in unlocked position1
SD lock
Carefully rotate the SD lock at 90
0
to lock or unlock the SD card slot. Do not not apply
excessive pressure while rotating the lock to the extreme end, to prevent it from
damaging.
Note
2
Uplink Ports
The C9200CX compact switches provide fixed uplink ports that support 10G SFP+ and 1G SFP modules.
For information about installing an optic module, see Installing an SFP or SFP+ Module, on page 45. The
SFP+ uplink ports and copper uplink ports on the switch can function simultaneously.
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
5
Product Overview
Uplink Ports

Cisco Catalyst 9200CX Compact Series Specifications

General

Model	Cisco Catalyst 9200CX Compact Series
Software	Cisco IOS XE
Power over Ethernet (PoE)	No
Stacking	Not supported
Weight	5.0 lb (2.3 kg)
Form Factor	Compact
Management	WebUI, CLI, SNMP, Cisco DNA Center
Power Supply	Internal power supply
Memory	4 GB DRAM
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to +70°C (-40°F to +158°F)
Relative Humidity	5% to 90% noncondensing
Ports	8, 12, or 24 10/100/1000BASE-T ports
Dimensions	1.73 x 10.5 x 9.45 in. (4.4 x 26.7 x 24 cm)