Cisco Catalyst 9200CX Compact Series User Manual

Temperature 12
Humidity 13
Altitude 13
Dust and Particles 13
Air Quality 13
Corrosion 14
EMI and Radio Frequency Interference 15
Power Source Interruptions 16
System Grounding 17
Maintaining Safety with Electricity 18
Verifying Switch Operation 19
Installing a Compact Switch 21
CHAPTER 3
Shipping Box Contents 21
Mounting the Switch 23
Mounting on a Desk or Shelf Without Mounting Screws 23
Mounting using the Mounting Tray and Screws 24
Mounting using the Mounting Tray and Magnet 27
Mounting Under a Desk or a Shelf 30
Mounting the Switch Using Rack Mount Brackets 34
Mounting the Switch on a DIN Rail 35
Connecting the System Ground 37
Attaching the Adapter Bracket to the Switch (Optional) 38
Installing the Power Cord Retainer (Optional) 41
Installing the Cable Guard (Optional) 43
Installing an SFP or SFP+ Module 45
10/100/1000 PoE and PoE+Port Connections 46
10/100/1000 Ethernet Port Connections 47
Auto-MDIX Connections 48
Configuring the Switch 49
CHAPTER 4
Configuring the Switch Using the Web User Interface 49
Configuring the Switch Using the CLI 49
Accessing the CLI Through the Console Port 49
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
iii
Contents

Cisco Catalyst 9200CX Compact Series Specifications

General

Model	Cisco Catalyst 9200CX Compact Series
Software	Cisco IOS XE
Power over Ethernet (PoE)	No
Stacking	Not supported
Weight	5.0 lb (2.3 kg)
Form Factor	Compact
Management	WebUI, CLI, SNMP, Cisco DNA Center
Power Supply	Internal power supply
Memory	4 GB DRAM
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to +70°C (-40°F to +158°F)
Relative Humidity	5% to 90% noncondensing
Ports	8, 12, or 24 10/100/1000BASE-T ports
Dimensions	1.73 x 10.5 x 9.45 in. (4.4 x 26.7 x 24 cm)