Cisco Catalyst 9407R User Manual

Blue beacon LED on the rear panel of the fan tray (always
matches the blue beacon on the front panel of the fan tray)
2Access to remove fan tray from the rear1
Table 1: Catalyst 9404R Switch Features
DescriptionFeature
Chassis model number (add = for spare)—Cisco Catalyst 9400 Series 4 Slot Chassis(C9404R)Product ID
Has four horizontal slots. Slots are numbered 1 (left) to 4 (right).Chassis
Supports 1+1 supervisor module redundancy for integrated resiliency. Supported model numbers (add = for
spare):
• Cisco Catalyst 9400 Series Supervisor 1 Module (C9400-SUP-1)
• Cisco Catalyst 9400 Series Supervisor 1XL Module ( C9400-SUP-1XL)
• Cisco Catalyst 9400 Series Supervisor 1XL-Y 25G Module (C9400-SUP-1XL-Y)
Supervisor modules:
• Must be installed in slots numbered 2 and 3 only.
• Have minimum software release version requirements. Refer to your software release notes for this
information.
See Cisco Catalyst 9400 Series Supervisor Module Installation Note.
Supervisor
modules
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
7
Product Overview
Catalyst 9404R Switch

Cisco Catalyst 9407R Specifications

General

Model	Cisco Catalyst 9407R
Category	Switch
Chassis Slots	7
Rack Units	10 RU
Form Factor	Rack-mountable
Slots	7
Maximum Number of Line Cards	5
Operating System	Cisco IOS XE
Product Type	Modular Switch
Power Supply Options	AC and DC
Redundancy	Yes