Cisco Catalyst 9407R User Manual

Step 2 Check the power supply and system status from the system console by entering show power command in
privileged EXEC mode.
Switch# show power
Step 3 If the LEDs or show power privileged EXEC command output indicate a power problem or other system
problem, see the Troubleshooting a Power Supply Module, on page 132 section for more information.
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
128
Removing and Replacing FRUs
Verifying the Power Supply Module Installation

Cisco Catalyst 9407R Specifications

General

Model	Cisco Catalyst 9407R
Category	Switch
Chassis Slots	7
Rack Units	10 RU
Form Factor	Rack-mountable
Slots	7
Maximum Number of Line Cards	5
Operating System	Cisco IOS XE
Product Type	Modular Switch
Power Supply Options	AC and DC
Redundancy	Yes