Cisco Catalyst 9606R User Manual

Figure 32: System Ground Connected
Step 5 Prepare the other end of the grounding wire, and connect it to an appropriate grounding point in your site to
ensure adequate earth ground for the switch.
Attaching an ESD Strap
After you install the system ground lug, follow these steps to correctly attach the ESD wrist strap:
Procedure
Step 1 Attach the ESD wrist strap to bare skin as follows:
a) If you are using the ESD wrist strap supplied with the FRUs, open the wrist strap package and unwrap
the ESD wrist strap. Place the black conductive loop over your wrist and tighten the strap such that it
touches your bare skin well.
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
60
Installing the Switch
Attaching an ESD Strap

Cisco Catalyst 9606R Specifications

General

Brand	Cisco
Model	Catalyst 9606R
Category	Switch
Language	English