12
Getting Started and Product Document of Compliance for the Cisco Catalyst IW6300 Heavy Duty Series Access Points
Hazardous Locations Standards and Marking Strings
Hazardous Locations Standards and Marking Strings
The following standards were used for the hazardous locations
approvals and certifications:
UL 60079-0 Edition 6 - Revision Date 2017/10/20
UL 60079-15 - Edition 4 - Revision Date 2017/05/05
CSA C22.2 NO. 60079-0: Edition 3 - Issue Date 2015/10
CSA C22.2 NO. 60079-15:16 Edition 2 - Issue Date 2016/06
IEC 60079-0, 6th Edition
IEC 60079-15, 4th Edition
EN 60079-0:2012 + A11:2013
EN 60079-15: 2010
UL 121201 - Edition 9 – Revision date 2019/08/26
UL 60079-0, 7th Edition, 2019-03-26
UL 60079-7, 5th Edition, 2017-02-24
UL 60079-31, 2nd Edition, JUNE 12, 2015
CSA C22.2 NO. 213 -Edition 3 – Revised 2019-08.
CAN/CSA C22.2 NO. 60079-7:16, OCTOBER 2016
CAN/CSA-C22.2 NO. 60079-0:19, 4th Edition
CAN/CSA-C22.2 NO. 60079-31:15
EN IEC 60079-0:2018
EN 60079-7: 2015 +A1:2018
EN 60079-31:2014
IEC 60079-0, 7th
IEC 60079-7, Edition 5.1
IEC 60079-31, 2nd Edition
The following hazardous locations marking strings are provided on the
IW-6300H-AC-x-K9:
Class I, Division 2, Groups A, B, C and D Hazardous Locations
Class I, Zone 2, AEx ec nA IIC T4 Gc, Zone 22 AEx tc IIIC T90°C Dc
Ex ec nA IIC T4, Ex tc IIIC T90°C Dc
II 3G Ex ec nA IIC T4 Gc
II 3D Ex tc IIIC T90°C Dc
DEMKO 19 ATEX 2296X
IECEx UL 19.0108X
To Next Page
Loading...
Need help?
General
