Cisco Catalyst IW6300 Series Getting Started

3
Getting Started and Product Document of Compliance for the Cisco Catalyst IW6300 Heavy Duty Series Access Points
Related Documentation
 ATEX/IECEx certified AC or DC power cable, based on the AP model ordered
 Loctite 565 Thread Sealant for 1/2” NPT Ports
 6-AWG (13.3 mm
2
) copper ground wire
 Ethernet RJ-45 connector and installation tool
 Optional ground rod, as required by local regulations
 Optional ladder, power lift, rope, or other tools as required
 ESD-preventive cord and wrist strap.
 Wire-stripping tools for stripping 14- and 18-gauge wires
 Crimping tool
Related Documentation
To access resources or to display the latest Cisco Catalyst IW6300 Heavy Duty Series Access Point documentation
on-line, go to this URL:
https://www.cisco.com/c/en/us/support/wireless/industrial-wireless-6300h-access-point/model.html
This portal has all of the information you need to get to know your device, install and configure it, as well as access
software. You will see the following categories as well as other important information:
 All support information for Cisco Catalyst IW6300 Heavy Duty Series Access Points: Provides the most
requested resources and a list of all of the models in the series.
 Release and General Information: Links to the Software Download site, Compatibility Information, Licensing
Information, and Product Release notes.
 Install and Upgrade: This is your starting point for Installing the device. look under The Install and Upgrade Guide
section for this model,
 Configure: These links provide configuration information. Look first under the Configuration Guide section for this
model.
Other important and helpful links to Cisco information are here:
 Cisco.com: www.cisco.com
 Warranty and EULA Information: https://www.cisco.com/c/en/us/products/warranty-listing.html
 Cisco Marketplace: www.cisco.com/pcgi-bin/marketplace/welcome.pl
 Cisco Product Documentation: www.cisco.com/go/techdocs
 Cisco Support: www.cisco.com/cisco/web/support/index.html

Cisco Catalyst IW6300 Series Specifications

General

Model	Cisco Catalyst IW6300 Series
Category	Wireless Access Point
MU-MIMO	Yes
Ingress Protection	IP67
Power Options	PoE, DC power
Frequency Bands	2.4 GHz and 5 GHz
MIMO	4x4
Input Power	48V DC
Power over Ethernet	802.3at
Mounting	Wall, Pole, Ceiling
Security	WPA3
Management	Cisco DNA Center