Cisco Catalyst IW6300 Series Getting Started

14
Getting Started and Product Document of Compliance for the Cisco Catalyst IW6300 Heavy Duty Series Access Points
Safety and Compliance Specifications
Safety and Compliance Specifications
The IW6300H access points comply with the following compliance specifications:
Specification Description
WW EMC-Emissions:
CLASS: A
FCC 47 CFR Part 15B
ICES-003 Issue 6: 2016
CISPR 22
EN 55022
CISPR32 Edition 2
EN 55032:2015
EN 61000-3-2: 2014 (Applicable to IW-6300H-AC-x-K9 only)
EN 61000-3-3:2013 (Applicable to IW-6300H-AC-x-K9 only)
VCCI CLASS A
AS/NZ CISPR32
WW EMC-Immunity CISPR24: 2010 + A1: 2015
EN 55024: 2010 + A1: 2015
CISPR35, EN 55035
EN 300386 V1.6.1
Radio (Wi-Fi) FCC Part 15.247, 15.407
FCC 2.1091
RSS - 247
RSS - 102
AS/NZS 4268 2017
MIC Article 2 paragraph 1 item (19)-2,3,3-2
KCC Notice No. 2013-1
EN 300 328v2.1.1, v1.9.1, v1.8.1
EN 301 893v2.1.1, v1.8.1, v1.7.1
EN 62311
LP0002: 2018
Regulatory Domain Support:
FCC (Americas Middle East, Africa, and parts of Asia)
ETSI (Europe, Middle East, Africa, and parts of Asia)
TELEC (Japan)
KCC (Korea)
Radio EMC EN 301 489 – 17
KN 301 489 – 17
Safety UL/CSA/EN/IEC 60950-1
UL/CSA/EN/IEC 62368-1
Ingress (water and dust)
Protection
UL 50E (type 4X)
EN/IEC 60529 (IP66 and IP67)
UL/CSA/IEC 60950-22 outdoor rating

Cisco Catalyst IW6300 Series Specifications

General

Model	Cisco Catalyst IW6300 Series
Category	Wireless Access Point
MU-MIMO	Yes
Ingress Protection	IP67
Power Options	PoE, DC power
Frequency Bands	2.4 GHz and 5 GHz
MIMO	4x4
Input Power	48V DC
Power over Ethernet	802.3at
Mounting	Wall, Pole, Ceiling
Security	WPA3
Management	Cisco DNA Center