Cisco Catalyst IW6300 Series Getting Started

19
Getting Started and Product Document of Compliance for the Cisco Catalyst IW6300 Heavy Duty Series Access Points
EMC Information
As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is
recommended to set the system in a location where the antennas can remain at least a minimum distance as specified
from the user in accordance to the regulatory guidelines which are designed to reduce the overall exposure of the user
or operator.
Health Canada states that present scientific information does not indicate the need for any special precautions for the
use of wireless devices. They recommend that if you are interested in further reducing your exposure you can easily do
so by reorienting antennas away from the user, placing the antennas at a greater separation distance than recommended,
or lowering the transmitter power output.
Additional Information on RF Exposure
You can find additional information on the subject at the following links:
 FCC Bulletin 56: Questions and Answers about Biological Effects and Potential Hazards of Radio Frequency
Electromagnetic Fields
 FCC Bulletin 65: Evaluating Compliance with the FCC guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields
 FCC Bulletin 65C (01-01): Evaluating Compliance with the FCC guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields: Additional Information for Evaluating Compliance for Mobile and Portable Devices with FCC
limits for Human Exposure to Radio Frequency Emission
You can obtain additional information from the following organizations:
 World Health Organization Internal Commission on Non-Ionizing Radiation Protection at this URL: www.who.int/emf
 United Kingdom, National Radiological Protection Board at this URL: www.nrpb.org.uk
 Cellular Telecommunications Association at this URL: www.wow-com.com
 The Mobile Manufacturers Forum at this URL: www.mmfai.org
EMC Class A Notices and Warnings
Statement 340—Class A Warning for CISPR22
Warning: Dies ist ein Produkt der Klasse A. Bei der Verwendung dieses Produkts im Haus- oder Wohnungsbereich
kann es zu Funkstörungen kommen. In diesem Fall muss der Benutzer u. U. angemessene Maßnahmen ergreifen.
Separation Distance
MPE Distance Limit
0.63 mW/cm
2
20 cm (7.87 inches) 1.00 mW/cm
2

Cisco Catalyst IW6300 Series Specifications

General

Model	Cisco Catalyst IW6300 Series
Category	Wireless Access Point
MU-MIMO	Yes
Ingress Protection	IP67
Power Options	PoE, DC power
Frequency Bands	2.4 GHz and 5 GHz
MIMO	4x4
Input Power	48V DC
Power over Ethernet	802.3at
Mounting	Wall, Pole, Ceiling
Security	WPA3
Management	Cisco DNA Center