Cisco cBR Series - Removing the Power Cassette Module from the Cisco CBR Chassis

What to do next
Replace the FPEM (if required).
Removing the Power Cassette Module from the Cisco cBR Chassis
Before you begin
• Remove the Power Modules.
• Be aware of the weight and size of the equipment. Handle it with care.
Required Tools and Equipment
• 3/16" flat-blade torque screwdriver
• T10 Torx screwdriver
Procedure
Step 1 Loosen the two screws on the front power entry bezel using a 3/16" flat-blade torque screwdriver. Remove the bezel from
the chassis.
8