Cisco CISCO837 - 837 ADSL Broadband Router

To Next Page

To Previous Page

2-7

Cisco 837 Router and SOHO 97 Router Hardware Installation Guide

78-14781-02

Chapter 2 Installation

Mounting the Router

You can mount the router on one of the following surfaces:

• Table or other horizontal surface

• Wall or other vertical surface

Mounting on a Table

Place the router firmly on a table, and perform the procedure given in the

“Installing the Router” section on page 2-10.

Caution Do not cover or obstruct the router vents, which are located on the sides of the

router. If the vents are covered or obstructed, overheating could occur and cause

damage to the router.

Mounting on a Wall

You can mount the router on a wall or other vertical surface by using the molded

mounting brackets on the bottom of the router and two number-six, 3/4-in.

(M3.5 x 20 mm) screws. You must provide the screws. Figure 2-1 shows the

mounting brackets.

Cisco CISCO837 - 837 ADSL Broadband Router - Router Mounting