2-23
Cisco 837 Router and SOHO 97 Router Hardware Installation Guide
78-14781-02
Chapter 2 Installation
Using the Router LEDs to Check Links
Step 8 Select Start/Run, and type winipcfg in the Open field of the Run window. When
the IP Config window appears, click Release to release the PC’s IP address.
Then click Renew to renew the PC’s IP address.
Alternatively, open the Run window and enter ipconfig /release to release the
PC’s IP address.Then enter ipconfig /renew to renew the IP address of the PC.
Step 9 Open a web browser on the PC, and connect to a website.
The router installation is complete when you have connected to a website.
To Next Page
Loading...
