Cisco CLI - Page 10

Command-line interface user manual
_________________________________________________________________________________________________
__________________________________________________________________________
© 2021 Cisco and/or its affiliates. All rights reserved Page 10 of 37
Account
Default user name
Default password
Permissions
Administrator
admin
admin
Full access, with read and
write permissions.
View Mode
user
viewmode
Read permissions only.
The user cannot change
configuration parameters.
If you are logging onto the device as an administrative user, log on using
the following command:
ssh <admin_user>@<device IP address>
If you are logging onto the device in View Mode, log on using the following
command:
ssh <view_mode>@<device IP address>