Cisco CLI - CLI Commands

Command-line interface user manual
_________________________________________________________________________________________________
__________________________________________________________________________
© 2021 Cisco and/or its affiliates. All rights reserved Page 14 of 37
8. CLI COMMANDS
8.1. Help content
Configuration objective
CLI command
Parameter options
Show context-sensitive help
content for the current
command. To be typed after the
command name and command
parameters.
?
8.2. Manage the device status logs
Configuration objective
CLI command
Parameter options
View or clear the device status
logs.
status A
Possible parameters for A are:
• show-logs (show the device
status logs that have been
created since the last clear
command was executed.)
• clear-logs (delete all
existing device status logs.)
• NEW I delete-logs (deep-
clean the repository
containing all device status
logs.)
8.3. View the current network uptime duration
Configuration objective
CLI command
Parameter options
Show the amount of time for
which the connected network
has been operational.
uptime
8.4. View the device configuration that is currently running
Configuration objective
CLI command
Parameter options
Show a detailed view of the
currently running device
configuration.
show-running-
config
8.5. Viewing and setting the device name
Configuration objective
CLI command
Parameter options
Show the device name that has
been assigned to the device.
devicename
Edit the device name that has
previously been assigned to the
device.
devicename A
Parameter A is the new device
name.
8.6. Running an installed iperf server or client
Configuration objective
CLI command
Parameter options
Run the installed iperf server
or client.
iperf
Specify iperf configuration
options.
iperf B
Parameter B is the specified
iperf configuration option.
For a detailed list of iperf