Cisco CLI - Page 16

Command-line interface user manual
_________________________________________________________________________________________________
__________________________________________________________________________
© 2021 Cisco and/or its affiliates. All rights reserved Page 16 of 37
passphrase.
D
passphrase.
Set the device’s maximum
transmission power output.
wireless txpower E
Parameter E is the maximum
transmission power level in
dBm.
This parameter must be
expressed as an unsigned
integer between 0 and 36.
Alternatively, enable automatic
transmission-power selection
by entering wireless
txpower AUTO. Note that
AUTO must be entered in
capitals.
Enable and disable the
device’s wireless interface.
wireless interface
G
Possible parameters for G are
enable and disable.
Set the device’s transmission
chain parameters.
wireless txchain H
Possible parameters for H are
first (transmission chain 1
only), second (transmission
chain 2 only) or both.
Enable and disable
Promiscuous Mode (backwards
compatibility with legacy
Fluidmesh units).
wireless promisc F
Possible parameters for F are
enable (enable full backwards
compatibility) and disable
(maintain compatibility with
newer devices only).
Set the device’s transmission
chain parameters.
wireless maxmcx H
Possible parameters for H are
first (transmission chain 1
only), second (transmission
chain 2 only) or both.
Enable and disable reduction of
false positive results during
dynamic frequency selection
(DFS) if the device is being
operated in the UNII2
frequency band.
wireless dfs
[reduce-false-
positives K]
Possible parameters for K are
enable and disable.
Set the wireless multimedia
(WMM) queue configuration
string.
wireless wmm N
N is the WMM configuration
string. This string takes the
following form:
[bk|be|vi|vo] aifs A cwmin B
cwmax C txop D ampdu E
In the string above,
[bk|be|vi|vo] represents the
class-of-service (CoS)
parameters.
• bk is the CoS background
queue parameter.
• be is the CoS best-effort
queue parameter.
• vi is the CoS video queue
parameter.
• vo is the CoS voice queue
parameter.
In the string above:
• A is the arbitration inter-
frame spacing value.
• B is the minimum