2140213021202110Specification
100/240 V AC 2.9 A (at 100 VAC), 50 to
60 Hz
The power supply module is
rated at 6.3 A, but the system
power is limited to 2.9 A.
Note
100/240V AC 1.9 A (at 100 VAC), 50 to
60 Hz
The power supply module is
rated at 4 A, but the system
power is limited to 1.9 A.
Note
System power
Operating: 32 to 104°F (0 to 40°C)
Nonoperating: -40 to 149°F (-40 to 65°C) maximum altitude is 40,000 ft
Temperature
Operating altitude: 0 to 13,000 ft (3962 m)
Operating temperature:
• Long Term: 0 to 45°C up to 6000 ft (1829 m)
• Long Term: 0 to 35°C 6000-13000 ft (1829-3964 m)
• Short Term: -5 to 55°C up to 6000 ft (1829 m)
Firepower 2100 series NEBS compliance applies only to the 2130.
Note
NEBS
Operating: 10 to 85 % noncondensing
Nonoperating: 5 to 95 % noncondensing
Humidity
Operating: 10,000 ft maximum
Nonoperating: 40,000 ft maximum
Altitude
55.7 dBA (typical)
76.7 dBA (maximum)
47.3 dBA (typical)
73.4 dBA (maximum)
Sound pressure
66 (typical)
84.5 (maximum)
60.2 (typical)
85.1 (maximum)
Sound power
Product ID Numbers
The following table lists all of the PIDs associated with the Firepower 2100 series. See the show inventory
and show inventory expand commands in the Cisco FXOS Troubleshooting Guide for the Firepower 2100
Series to display a list of the PIDs for your Firepower 2100.
Table 8: Firepower 2100 Series PIDs
DescriptionPID
Cisco Firepower 2110 NGFW appliance 1 RUFPR2110-NGFW-K9
Cisco Firepower 2120 NGFW appliance 1 RUFPR2120-NGFW-K9
Cisco Firepower 2100 Series Hardware Installation Guide
30
Overview
Product ID Numbers
To Next Page
Loading...
Need help?
General
