Cisco Firepower 2140 Hardware Installation Guide

The Firepower 2130 is Network Equipment Building Systems (NEBS)-certified.
Note
Figure 1: Firepower 2110/2120 and Firepower 2130/2140
See the Cisco Interactive Library for a video that displays the features and components of the Firepower 2100.
The following table lists the features for the Firepower 2100 series.
Table 1: Firepower 2100 Series Features
2140213021202110Feature
1 RU
Fits standard 19-in. (48.3-cm) square-hole rack.
Form factor
Yes
4-post EIA-310-D rack
(Optional) Two 2--post mount brackets
Yes
Two 2-post mount brackets
(Optional) 4-post EIA-310-D rack
Rack mount
Front to rear
Cold aisle to hot aisle
Airflow
Single 16-core at 1.3
G
Single 8-core at 2.0
G
Single 6-core at 1.9
G
Single 4-core at 1.8
G
Intel x86 processor
64 GB DDR4
DRAM
32 GB DDR4
DRAM
16 GB DDR4 DRAMIntel x86 memory
Single 16-core at 1.8
G
Single 12-core at 1.2
G
Single 8-core at 1.2
G
Single 6-core at 1.2
G
Cavium Network
Processor Unit
(NPU)
16G8 GCavium NPU RAM
8 G (nominal)Flash
24
16Maximum number
of interfaces
1 Gigabit Ethernet (10 M/100 M/1 G Base-T)Management port
RJ-45 serial portConsole port
USB 2.0 Type A (500 mA)USB port
Cisco Firepower 2100 Series Hardware Installation Guide
2
Overview
Features

Cisco Firepower 2140 Specifications

General

Model	Cisco Firepower 2140
Category	Firewall
Firewall Throughput	20 Gbps
Power Supply	Dual, Hot-swappable
Firewall Throughput (Maximum)	20 Gbps
Firewall Throughput (Application Visibility and Control AVC)	10 Gbps
Form Factor	1 RU
Memory	32 GB
Operating System	Cisco Firepower Threat Defense (FTD)
Maximum Concurrent Sessions	4, 000, 000
Network Interfaces	8 x 1G/10G SFP+
Concurrent Sessions	4, 000, 000
Interfaces	8 x 1G/10G SFP+
Throughput	20 Gbps