Cisco FMC 2600 User Manual

Figure 7: Front Panel LEDs and Their States
Drive activity LED:
• Off—There is no drive in the drive tray (no
access, no fault).
• Green—The drive is ready.
• Green, flashing—The drive is reading or
writing data.
2Drive fault LED:
• Off—The drive is operating properly.
• Amber—Drive fault detected.
• Amber, flashing—The drive is rebuilding.
• Amber, flashing with 1-second
interval—Drive locate function activated in
the software.
1
Unit identification LED:
• Off—The unit identification function is not
in use.
• Blue, flashing—The unit identification
function is activated.
4Power LED:
• Off—There is no AC power to the chassis.
• Amber—The chassis is in standby mode.
• Green—The chassis is in main power mode.
Power is supplied to all components.
3
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
10
Overview
Front Panel LEDs

Cisco FMC 2600 Specifications

General

Model	FMC 2600
Category	Firewall Management Center
RAM	32 GB
Product Type	Firewall Management Center
CPU	Intel Xeon
Supported Devices	Firepower Threat Defense (FTD)
Management Interfaces	Web-based GUI, CLI
CPU Details	Intel Xeon E3-1220 v5 3.0 GHz
Form Factor	1U
Operating System	Cisco Firepower Management Center
Management Ports	2 x 10/100/1000 Ethernet