Cisco FMC 2600 User Manual

Figure 1: Package Contents
RJ-45 to DP9-RS232 console cable (Cisco part
number 72-3383-XX)
2Chassis1
RJ-45 to RJ-45 Cat 5 Ethernet cable, yellow six
feet long (Cisco part number 72-1482-XX)
4Cisco rail kit (Cisco part number 800-43376-02)3
Two 10-Gb SFP+ transceivers with cables
Optional for all models; in package if ordered.
6Useful Links Cisco Firepower Management
Center 1600, 2600, and 4600
The steps in the Useful Links document send you
to the documentation you need to install, set up,
and configure your FMC.
5
Serial Number Locations
The serial number (SN) for the FMC 1600, 2600, and 4600 is printed on the pullout asset card located on the
front panel as shown in the following figure of the FMC 1600.
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
4
Overview
Serial Number Locations

Cisco FMC 2600 Specifications

General

Model	FMC 2600
Category	Firewall Management Center
RAM	32 GB
Product Type	Firewall Management Center
CPU	Intel Xeon
Supported Devices	Firepower Threat Defense (FTD)
Management Interfaces	Web-based GUI, CLI
CPU Details	Intel Xeon E3-1220 v5 3.0 GHz
Form Factor	1U
Operating System	Cisco Firepower Management Center
Management Ports	2 x 10/100/1000 Ethernet