Cisco FMC 2600 User Manual

CHAPTER 1
Overview
• Features, on page 1
• Package Contents, on page 3
• Serial Number Locations, on page 4
• Front Panel, on page 6
• Front Panel LEDs, on page 9
• Rear Panel, on page 12
• Rear Panel LEDs, on page 13
• Power Supply, on page 14
• Hardware Specifications, on page 15
• Product ID Numbers, on page 15
• Power Cord Specifications, on page 16
Features
The Cisco Firepower Management Center (FMC) 1600, 2600, and 4600 management appliances run software
that provides extensive intelligence about the users, applications, devices, threats, and vulnerabilities that exist
in your network. It also uses this information to analyze your network’s vulnerabilities. It then provides tailored
recommendations on what security policies to put in place and what security events you should investigate.
See Product ID Numbers, on page 15 for a list of the field-replaceable product IDs (PIDs) associated with
the FMC 1600, 2600, and 4600. You can remove and replace drives and power supplies. For all other internal
component failures, you must send your chassis for return material authorization (RMA).
The FMC management appliances support Cisco Firepower Threat Defense software. See the Cisco Firepower
Compatibility Guide, which provides Cisco Firepower software and hardware compatibility, including operating
system and hosting environment requirements, for each supported Firepower version.
The following table lists the features of the FMC 1600, 2600, and 4600.
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
1

Cisco FMC 2600 Specifications

General

Model	FMC 2600
Category	Firewall Management Center
RAM	32 GB
Product Type	Firewall Management Center
CPU	Intel Xeon
Supported Devices	Firepower Threat Defense (FTD)
Management Interfaces	Web-based GUI, CLI
CPU Details	Intel Xeon E3-1220 v5 3.0 GHz
Form Factor	1U
Operating System	Cisco Firepower Management Center
Management Ports	2 x 10/100/1000 Ethernet