Cisco FMC 2600 User Manual

Power supply (one LED for each power supply):
• Off—No AC input (12-V main power off;
12-V standby power off)
• Green, flashing—12-V main power off; 12-V
standby power on.
• Green—12-V main power on; 12-V standby
power on.
• Amber, flashing—Warning threshold
detected but 12-V main power on.
• Amber—Critical error detected; 12-V main
power off ( for example, overcurrent,
overvoltage, or overtemperature failure).
6Unit identification:
• Off—The unit identification function is not
in use.
• Blue, flashing—The unit identification
function is activated.
5
Power Supply
The following table lists the specifications for each 770-W AC power supply used in the FMC 1600, 2600,
and 4600.
Table 2: Power Supply Specifications
SpecificationDescription
1313 BTU/hrPower consumption
Nominal range: 100 to 120 V AC, 200 to 240 V AC
Range: 90–132 V AC, 180–264 V AC
AC input voltage range
Nominal range: 50–60 Hz
Range: 47–63 Hz
AC input frequency
9.5 A peak at 100-V AC
4.5 A peak at 208 V AC
Maximum AC input current
950 VA at 100 V ACMaximum input volt amperes
770 WMaximum output power for each power supply
15 A (subcycle duration)Maximum inrush current
12 ms at 770 WMaximum hold-up time
12 V DCPower supply output voltage
12 V DCPower supply standby voltage
Climate Savers Platinum Efficiency (80 Plus Platinum
certified)
Efficiency rating
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
14
Overview
Power Supply

Cisco FMC 2600 Specifications

General

Model	FMC 2600
Category	Firewall Management Center
RAM	32 GB
Product Type	Firewall Management Center
CPU	Intel Xeon
Supported Devices	Firepower Threat Defense (FTD)
Management Interfaces	Web-based GUI, CLI
CPU Details	Intel Xeon E3-1220 v5 3.0 GHz
Form Factor	1U
Operating System	Cisco Firepower Management Center
Management Ports	2 x 10/100/1000 Ethernet