Cisco GS7000 - Tools and Test Equipment

Chapter 4 Setup and Operation
90
Tools and Test Equipment
Required Tools and Test Equipment
Tools and test equipment required for setup are listed below. Equivalent items may
be substituted. Ensure test equipment is calibrated and in good working order.
 Fluke Model 77 (or equivalent) true-rms digital voltmeter (DVM) with 0.001
resolution.
 Signal generator capable of generating carriers at 55.25 MHz and 1.2GHz
 “F” barrel adapter – 1.2 GHz
 Field strength meter capable of measuring up to 1.2GHz
 Field sweep receiver/transmitter with a minimum bandwidth of 1.2 GHz
 EXFO FOT 22AX optical power meter with adapters
 Fiber optic jumper to test transmitter optical output power
 Glendale Technologies optical eye protection blocking 900–1600 nm light