Cisco GS7000 - Page 67

Optical Amplifier (EDFA) Modules
47
Optical Amplifier Module Diagram
The following block diagram shows how the optical amplifier module functions.
Optical Amplifier Operating Parameters
This section is a reference for the operating parameters of the EDFA. The EDFA is
configured through the Status Monitor/Local Control Module in the housing lid.
Refer to the GS7000 Hub/Node Status Monitor/Local Control Module Installation and
Operation Guide, part number OL-29937, for complete instructions on configuring the
EDFA.
Configurable Parameters
The following table defines the configurable parameters for the EDFA.