Cisco IP 7940 Configuration Guide

Cisco IP Phone Configuration Guides
www.yeastar.com Page 3
Introduction
This guide is applicable to CISCO IP 7940, IP7960, SPA 501G, 502G, 504G,
508G, 509G, 514G, 512G, 525G2.
Please Note:
This guide has been tested with firmware version 7.4.6. Be aware that different
firmware versions may have different web interface formats and functionality.
This is based on a new phone OR one that has been reset to factory defaults. If
in doubt, reset the phone to Factory Defaults.

Cisco IP 7940 Specifications

General

Audio Codec Support	G.711, G.729a
Speakerphone	Yes
Line Buttons	2
Display	LCD
Protocol Support	SCCP, SIP
Ethernet Ports	2 x 10/100Base-TX
Power Options	Power over Ethernet (PoE), AC adapter
Weight	3.5 lb (1.6 kg)