19
Getting Started and Product Document of Compliance for the Cisco IR1101 Industrial Integrated Services Router
Antennas
The Cisco IR1101 Industrial Integrated Services Router (Industrial ISR) is a next generation modular industrial router
which has a base module with additional pluggable modules that can be added. The plug-in module is referred to as the
Advanced Interface Module (AIM), or the pluggable. The pluggable provides the flexibility of adding different interfaces
to the IR1101 platform, for example, a cellular module. These modules are equipped with antenna connectors to allow
the use of dedicated (external) antennas available from Cisco.
The following link to the data sheet lists the antennas that can be used by IR1101. All antennas where assessed together
with the equipment against the requirements of the R&TTE directive.
https://www.cisco.com/c/en/us/support/routers/1100-series-industrial-integrated-services-routers/tsd-products-su
pport-series-home.html
Depending on the country a different regulatory limit might be applicable. It is therefore the responsibility of the end user
to select a power level that, together with the antenna, results in an eirp (radiated power) level that is below the applicable
limit.
Note: The antenna gain mentioned does not include the cable loss. For all combinations, the total of power level, antenna
gain and cable loss is equal to or below 43.5 dBm (eirp).
To Next Page
Loading...
