Beta Draft - Cisco Confidential
2-2
Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0
OL-22971-01
Chapter 2 Introducing the Cisco ISE-3300 Series Hardware
Product Overview
ISE-3315 Appliance Overview
The Cisco 3315 (ISE-3315) is intended for small network environments and the following list provides
some general physical, environmental, and feature information about the ISE-3315 appliance (for more
details, see Table 2-1):
• Weight—from 24.25 lb (11.0 kg) to 28.0 lb (12.7 kg) depending on what options are installed.
• Dimensions—1.75 inches high x 17.3 inches wide x 22.0 inches deep (44.5 mm x 440.0 mm x
559.0 mm); these dimensions do not include the rack handles.
• Cooling fans—five (plus two on the power supply).
• Rack mounting—Uses slide-rails (see Installing the Slide Rails in a Rack, page 44); mounts in a
standard 19-inch (48.3 cm), 4-post equipment rack (using the provided rack-mount brackets).
• Maximum operating altitude—7,000 feet (2,133 meters).
• Operating temperature range—50 to 90° F (10 to 35° C) up to 3,000 feet (914.4 meters); 50 to 90° F
(10 to 32° C) 3,000 to 7,000 feet (914.4 to 2,133 meters).
• Power—configured for AC-input power; has a single auto-ranging AC-input power supply.
• Front-panel features:
–
Power status LED
–
Power button
–
Reset button
–
Hard disk drive (HDD) activity LED
–
Locator button/LED
–
System health LED
–
USB port 1 and port 2
–
Two HDD bays
–
CD-ROM/DVD drive
For the location of the front panel features, see ISE-3315 Front Panel Features, page 27.
• Rear panel features:
–
NIC 1 (eth0) activity LED
–
NIC 1 (eth0) link LED
–
NIC 2 (eth10) activity LED
–
NIC 2 (eth1) link LED
–
Power supply cable socket
–
NIC 3 (eth2) and NIC 4 (eth3) add-on cards
–
Serial port
–
Video port
–
NIC 2 (eth1) and NIC 1 (eth0) Gigabit Ethernet interfaces
–
USB port 3 and port 4
–
Console port
For the location of the rear panel features, see ISE-3315 Rear Panel Features, page 28.
To Next Page
Loading...
