11
Installing Your Modem
Linksys DPC3008/EPC3008
• Choose a location that is relatively protected from accidental disturbance
or harm, such as a closet, basement, or other protected area.
• Choose a location with plenty of room for guiding the cables away from
the modem without straining or crimping them.
• Choose a location that allows adequate ventilation around the modem.
Wall-mounting the modem (optional)
Selecting a wall mount location
You can mount the modem to a wall made of cement, wood, or drywall.
Consider the following recommendations:
• Make sure that the mounting location is free of obstructions on all sides,
and that the cables can reach the modem without strain.
• Leave enough clearance between the bottom of the modem and any
flooring or shelving underneath to allow access to cabling.
• Allow enough slack in all cables so that the modem can be removed for
any required maintenance without disconnecting the cables.
Equipment needed
• Two wall anchors for #8 x 1-inch screws
• Two #8 x 1-inch pan head sheet metal screws
• Drill with a 3/16-in. wood or masonry bit, as appropriate for the wall
composition
• A copy of the wall-mounting illustrations shown on the following pages
Positioning the modem
Use the following illustration to guide you in positioning the modem on the
wall.
To Next Page
Loading...
Need help?
General
