Phone Adapter with 2 Ports for Voice-over-IP
33
Appendix D: Specifications
Appendix D: Specifications
Model PAP2
Standards SIP v2 Session Initiation Protocol (RFC 3261, 3262, 3263, 3264)
Voice Codecs G.729 A+B, G.711 a-law, G.711µ-law, G.726
Ports Power, Ethernet, Phone 1, Phone 2
Cabling Type CAT 5 (RJ45) for Ethernet Port and RJ11 for Phone Ports
LEDs Power, Ethernet, Phone 1, Phone 2
Maximum Ringer Load 5 REN
Ring Frequency 10-40 Hz
FXS Port Impedance Eight Configurable Settings Including North America 600 ohms,
European CTR21
Ring Voltage 60-90 Vrms Configurable
Security Features Password Protected Administration
To Next Page
Loading...
